My Internet Speed Test: Your NBN and ADSL Download Speed
How to test NBN internet speed
First step: check what NBN speed tier you are paying for. There are four speeds (Basic nbn12, Standard nbn25, Standard Plus nbn50 and Premium nbn100) and the speed you are paying for will inform the quality of your results.
Checking your NBN internet speed couldn’t be simpler. Simply make sure you’re connected to the internet via your home NBN Wi-Fi modem with the device you plan to test on and hit the big “GO” button at the top of this page. If you are testing from your smartphone and you’re not connected to Wi-Fi, the speed test will return results from your mobile network (also handy to know).
When you see a bunch of moving bars and graphs, the speed test is running. Allow around 30 seconds to a minute to complete the test. Once it’s finished, it will return an accurate snapshot of your connection’s download speed, upload speed, ping, and jitter.
While ping and jitter are important to many users, download and upload speed are the two most important data points in your test (they are, after all, what you usually pay extra for).
Fastest internet in Australia
According to the ACCC’s broadband testing program, TPG has the most consistent track record of delivering the evening speeds it advertises. TPG self-reports that its Premium plan delivers 88.1Mbps on a typical evening. That claim, combined with TPG’s impressive ACCC test results, would make TPG’s Premium plan the fastest in Australia (on average). Gotta go fast.
What is a good internet speed test result?
That depends on what NBN speed tier you’re paying for. There are four available NBN speed tiers:
- Basic Evening Speed: Potential 12 Mbps download and 1 Mbps upload
- Standard Evening Speed: Potential 25 Mbps download and 5 Mbps upload
- Standard Evening Plus Speed: Potential 50 Mbps and 20 Mbps upload
- Premium Evening Speed: Potential 100 Mbps download and 100 Mbps upload
These are the potential speeds for every tier but the nbnco advertises its own “typical minimum” speeds and the ACCC reports that Australian ISPs deliver about 82.18% of their advertised speeds, on average. ISPs also self-report the typical speeds you can expect on their plans. For more information on what kind of speeds to expect, head over to our comprehensive guide to NBN speed tiers.
For a rough guide on what kind of speeds you should be getting at each tier, run the test above and compare the results with the table below.
|Standard||0 – 15 Mbps||15 – 22 Mbps||22 – 25 Mbps|
|0 – 30 Mbps||35 – 40 Mbps||40 – 50 Mbps|
|Premium||0 – 60 Mbps||60 – 85 Mbps||85 – 100 Mbps|
What is ping in a speed test?
Once the speed test has run, you will notice a value for “Ping” in the results. Ping is used to measure the response time of your internet connection. Download speeds represent the rate at which you can download a file over the internet. The higher the download speed, the faster you will download that whopping 4K version of Star Wars: The Last Jedi. Ping measures the response time between you clicking download, the server recognising your action and the action appearing on the computer in front of you (e.g. “Downloading”). Because of the speed of the internet these days, ping speed is typically measure in milliseconds.
To test the response time, the ping sends a packet of data to a specific IP address, waits for a signal to return and measures the milliseconds in-between.
It’s near imperceptible in most cases so why should it matter? Well, it might not matter for you but for certain types of uses, like online gaming, a few milliseconds can make all the difference.
If you’ve ever heard (or complained about) lag; that’s due to high ping on the connection. If you’re experiencing high ping, consider using a wired internet connection by running an ethernet cable to your computer rather than a WiFi connection.
If that doesn’t help, there’s a long list of troubleshooting methods that can potentially improve the speed on your connection. If that doesn’t improve your download speed and ping, it might be time to consider switching providers.
How to test latency speed
What’s a good ping/latency result?
In most cases, anything under 100ms is ideal. The sweet spot is below 50ms but most NBN connections in Australia average around 15.33ms according to the ACCC’s broadband testing program so ping’s not much of an issue Down Under.