Black Hawk Electric Street Series V3 review: Black Hawk Down-hill
I recently changed jobs and moved to an office closer to home. And because Sydney’s public transport is a nightmare, despite shaving 6kms off my commute to work, my commute time almost doubled. I’m also not a big fan of taking the bus; in my area, the buses really push the capacity and a lot of travellers can’t seem to grasp the idea of covering their mouths when they cough.
But, I could spend another 5,000 words ranting about Sydney’s public transport. I’m here to tell you about a recent purchase that has saved me from that particular Hell: the Black Hawk Electric Street Series V3; an affordable, entry-level electric skateboard for those new to the game or those getting back on a board for the first time in a long time.
The argument for the Black Hawk Electric Street Series V3
If you’ve been keeping your eye on the growing popularity of electric transport options, you might have noticed the rising interest in electric scooters, skateboards and e-bikes. These products are intended for that last leg of your commute; from the train station to work or home and vice versa.
As mentioned above, I’ve managed to replace my entire commute with a breezy ride to work amongst nature. I get a little more sun than usual and even a slight core workout. This won’t be an option for most, the Street Series V3 advertises a 15km range before the battery goes kaput but in my experience, it does about three-quarters of that before it starts to lose its oomph.
The LG 4.4Ah 24V Lithium-Ion battery won’t last as long as more expensive boards, but it also won’t take as long to charge. A full charge takes roughly 3 hours from 0 to 100% and the included charger is compact enough to store in a backpack but maybe too big to carry on your person if you like to travel light.
The Black Hawk Electric Street Series V3 advertises a modest hill gradient of 5%, whereas more expensive models, like the Evolve GT, claim to handle hills of up to 15% gradients. The 5% hill gradient climb seems fairly accurate but even slight hills are a struggle when the battery drops below 50% . This will be a different experience for everyone depending on your weight. I’m a slightly chunky boy at roughly 85kgs carrying a backpack with a Surface Book 2 which weighs roughly 2kgs itself. I’m more or less on the cusp of the board’s 90kg weight limit and while I don’t think I hit the advertised max speed of 20-25kms on a straight run, I’d come close.
Belt-free motor is wheely cool but it has its downsides
What makes the Black Hawk Electric Street Series V3 unique is its belt-free torque hub motors. Most electric skateboards are driven using a traditional belt motor (basically a fan belt) but Black Hawk’s 400W (each) hub motors are housed inside the rear polyurethane wheels.
This design has its pros and cons. An exposed belt can be destroyed by the type of debris you’re likely to hit on the sidewalk; twigs, rocks and the like. In fact, one of my coworkers had that exact problem with their Evolve GT. Keeping the motor protected inside each wheel more or less eliminates that threat. There’s a small grill on each wheel but the opening isn’t big enough to allow anything too nasty in. It’s an incredibly innovative design and would be a deciding factor for some but there are a couple of issues with the design.
Firstly, it means there are 12 additional screws on each wheel. My ride home can be a little bumpy at times and every couple of days, I’ll begin to notice a concerning rattle from the rear wheels where a few too many bumps has wiggled a screw loose. It’s not a big deal at when it happens — I’ll just tighten the screws when I get home. But I’m not always that diligent and at the time of writing, I’ve lost three screws at one point or another.
The polyurethane rim on the rear wheels is also a little fragile. Thanks to the motor taking up the bulk of the back wheels, you don’t get the full poly body of the front wheels, but rather a thin wheel “skin” that’s only a few millimetres thick. My rear wheels are absolutely shredded after a few months of riding to and from work, making for a pretty rough ride. The positive side to this is that Black Hawk sells replacement wheel skins at a generous $19 a pop; a price I’m more than happy to pay to keep this board in good nick.
Gold-star service and warranty
It’s also worth mentioning that each board comes with a 12-month warranty and a servicing checklist that details the manufacturer’s quality assurance process. It’s a nice, personalised touch that eschews any concerns I had around the safety of this deck. It didn’t just roll off a machine-operated assembly line and into my apartment; a real human has done their due diligence in ensuring my particular board was up to scratch before it was shipped.
Handled with care
I’ve tested Evolve’s GT line and while they are in another league when it comes to power, speed and battery life, I’ve found the handling on them to be a little stiff and unnatural. The experience of carving up the sidewalk with the Black Hawk Electric Street Series V3 is much more comparable to what I’m accustomed to with my standard longboard.
Admittedly, I had to loosen the trucks a little when I first received my V3 as shifting my weight was putting significant stress on the board’s Canadian Maple deck, resulting in a very creaky maiden voyage. A little tailoring to your personal needs is standard with any skateboard, electric or otherwise.
Speaking of handling, Black Hawk’s cheaper selection, including the Street Series and more compact/cheaper Urban Series both have a handle cut out from the maple deck. This has been a godsend for journeys with multiple legs; from packed buses and trains to busy sidewalks, the handle is a simple feature that makes transporting the 6kg deck a comfortable experience. I’ve been left wondering why more decks don’t have this. There’s no downside to having the cutout as far as I can see.